你好,欢迎光临山东吉凌化工有限公司!

产品中心

当前位置:首页 - 新闻资讯 > 吉凌化工动态 >

吉凌化工动态

荧光增白剂OB-1使用效果好吗


网址:http://www.jilinghuagong.com  时间:2019-04-10 15:15:07

  型材扣板增白剂首选荧光增白剂OB-1,主要有三方面的原因。一、荧光增白剂OB-1可以承受300度的高温,完全可以适应型材扣板加工时的温度;第二、荧光增白剂OB-1的增白效果强。即便是使用回收料进行生产,增白剂OB-1也可以让产品焕然一新;第三、比较为重要的一点就是增白剂OB-1的价格便宜,而且添加量只有万分之二到万分之三,也就是说一吨原料只需添加200到300克即可。
  The fluorescent whitening agent OB-1 is the preferred whitening agent for the fastener of profile, which has three main reasons. First, the fluorescent whitening agent OB-1 can withstand 300 degrees of high temperature, and can completely adapt to the processing temperature of the profile fastener; second, the fluorescent whitening agent OB-1 has a strong whitening effect. Even using recycled materials for production, brightener OB-1 can make the product brand-new; third, the most important point is that brightener OB-1 is cheap, and the amount of addition is only two to three parts per ten thousand, that is to say, only 200 to 300 grams per ton of raw materials can be added.
  荧光增白剂OB-1是优良的恶唑类增白剂,不溶于水,性能稳定,具有良好的耐热、耐晒、耐氯漂和耐迁移等性能。增白剂Ob-1可用于ABS、PS、HIPS、PA、PC、PP、EVA和硬质PVC等塑料增白
  Fluorescent whitening agent OB-1 is an excellent oxazole whitening agent, insoluble in water, stable performance, good heat resistance, sun resistance, chlorine bleaching resistance and migration resistance. The whitening agent Ob-1 can be used to whiten plastics such as ABS, PS, HIPS, PA, PC, PP, EVA and rigid PVC.
  荧光增白剂OB-1物理参数
  Physical parameters of fluorescent brightener OB-1
  分子式:C28H18N2O2
  Molecular formula: C28H18N2O2
  分子量:414.45
  Molecular weight: 414.45
  含 量: 99.5%
  Content: 99.5%
  灰 份: 0.5%
  Ash: 0.5%
  外 观: 黄色或黄绿色结晶粉末
  Appearance: Yellow or yellowish green crystalline powder
  熔 点: 355—360°C
  Melting Point: 355-360 degrees C
  相溶性:溶于有机溶剂
  Miscibility: soluble in organic solvents
  荧光增白剂OB-1使用方法
  Usage of fluorescent brightener OB-1
  1、 型材扣板管用增白剂ob-1的添加量为万分之二到三,即每吨添加200克到300克。一步,称取200克增白剂OB-1。
  1. The dosage of whitening agent OB-1 for the fastener tube of profiles is two to three tenths of ten thousand, that is, 200 to 300 grams per ton. The first step is to weigh 200 g brightener OB-1.
  2、 将200克增白剂ob-1与其它原料助剂产品在搅拌机中混合均匀,倒入存料池中即可。
  2. Mix 200 g whitening agent OB-1 with other raw material additives in mixer and pour into storage tank.
  型材2
  Profile 2
  添加过增白剂ob-1生产出来的型材扣板白度值可达95以上,亮度也非常好,可达到镜面效果!而且增白剂ob-1可以吸收自然光线中的紫外线防老化,让您产品更耐用,不泛黄、不变色褪色!
  The whiteness value of the button plate produced by adding the whitening agent OB-1 can be over 95, the brightness is very good, and the mirror effect can be achieved! And the whitening agent OB-1 can absorb ultraviolet rays in natural light to prevent aging, so that your product is more durable, not yellowing, no fading!
  注意事项
  Matters needing attention
                              荧光增白剂OB-1
  1、注意增白剂ob-1荧光增白剂的添加量,控制在每吨200克左右不得添加过多或过少!
  1. Attention should be paid to the dosage of fluorescent whitening agent ob-1, which should not be added too much or too little at about 200 grams per ton.
  2、增白剂ob-1要与原料充分混合均匀!
  2. The whitening agent OB-1 should be fully mixed with the raw material.

上一篇:荧光增白剂的几种检测方法      下一篇:荧光增白剂产品哪种好

山东吉凌化工有限公司    电话:0531-88685898  13573799911   地址:济南市恒大城(济南市历城区工业北路58号)
本网站由:济南诺商提供技术支持   
   备案号:鲁ICP备18045464号-1

鲁公网安备 37011202000763号